How to make Homemade Air Conditioner

भिडियो हेर्न तलको बक्स भित्र क्लिक गर्नुहोस

I used zip ties to hold the tubing to the grate. Of course, because this will be inside the fan, make sure to clip off the loose ends. Also, make sure that you have both ends of the copper tubing sticking out of the fan, so you can hook up the tubes to the pump. I took the grate off of my fan, so I could put the heat exchanger on the inside, hopefully making it look better. I’m using copper tubing as the heat exchanger, although you could use something else, as copper is not cheap, and not easy to work with. As you can see in the second photo, it’s very easy to kink the tubing, in which case, you stop the flow of water. I grabbed a hole saw to use as a die to wrap the tubing around, and the teeth held nicely against the grate of the fan. As I was going along,